Total IR Control for Linux
Home arrow Support arrow CommandIR Utils arrow commandir_send
 
commandir_send Manual Page
commandir_send 1.00-pre3

 Send IR codes to CommandIR (or commandird) for transmitting

commandir_send [-n] [-dDELAY] [[-bEMITTER_BITMASK_HEX] | [-eEMITTERNUM] -sCOMMANDIR_NAME] FILENAME [FILENAME]...
commandir_send [-n] [-dDELAY] [[-bEMITTER_BITMASK_HEX] | [-eEMITTERNUM] -sCOMMANDIR_NAME] -r [RAW CODE STRING]

 -n[HostName] - Use a network connection to send the command to a commandird
                server.  Defaults to localhost if no host specified. 
 -s used in conjunction with commandir_set and CommandIR Firmware 3.42+
Examples:
 Send two commands to emitter 3 with a 500ms delay in between:
  commandir_send -d500 -e3 amp_volup amp_volup
 Send one command to emitters 1, 2, 3 and 4:
 commandir_send -b0F sa_power
 Send two commands to emitter 2 on a specific CommandIR named 'COMMANDIR_0':
  commandir_send -sCOMMANDIR_0 -e2 amp_volup amp_volup
 Send two commands to emitter 2 on a remote CommandIR using commandird:
  commandir_send -n192.168.1.15 -e2 amp_volup amp_volup
 Send command Hex Code directly:
  commandir_send -bff -r 0000 0074 0017 0000 0020 0021 0020 0020 0020 0021 0020 0020 0020 0021 0020 0020 0020 0021 0020 0020 0040 0020 0020 0041 003F 0041 0020
Last Updated: Thursday, 17 November 2011
 
  



CommandIR Control Technologies is a division of InnovationOne Applied Technology.

(C) 2006-2012, All Rights Reserved. 

Last update: Mon Oct 29 22:23:04 EDT 2012

 

Privacy   Terms of Use